DANTE WALLPLATE 2X2 MULTI I/O (2CH) WHT

UND3IO-WH
5 Years WARRANTY
SUMMARY A 2-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.



INPUTS XLR ...
SUMMARY A 2-in, 2-Out I/O Interface that is a convenient, cost-effective way to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.

INPUTS XLR input with switchable mic/line gain and switchable phantom power on the inputs. Choice of unbalanced input (RCA or 3.5mm stereo jack) selectable by software.

OUTPUTS Balanced XLR output (Ch. 1 only) and unbalanced 3.5mm stereo jack (Ch. 1 & 2)

CONTROL Audio flow assignment, input gain, phantom power and unbalanced input selection are all controllable via the Dante network connection

Firmware Compatibility Note: Two versions of firmware are available for this product that each support a different control method. Click this link for further details.

Audio input routing note: The input configuration can be modified using the unIFY Control Panel software or other compatible controllers. Inputs 2A and 2B are mono-summed respectively and audio from either Input 2A, Input 2B, or the sum of both can be chosen as the input source for Dante™ TX channel 2. The following diagram illustrates the internal audio signal path of the unD3IO.
Resources
Brands
Installed Audio
Installed Video
Portable Audio
Studio / Broadcast